On 18 March 2025, Japan’s Ministry of Health, Labour and Welfare (MHLW), Ministry of Agriculture, Forestry and Fisheries (MAFF), and Ministry of Economy, Trade and Industry (METI) released the draft design certification standards for plastic products. The draft has been made available for public consultation via Japan’s e-GOV Public Comment Portal. It is based on the Plastic Product Design Guidelines published under Notification 1 of 2022.
Design Certification Standards for PET Bottle Containers for Soft Drinks
The standards for polyethylene terephthalate (PET) containers for soft drinks outline specific requirements to improve recyclability and sustainability.
1. Component Requirements
Each component must meet all of the requirements listed below:
Bottle
Must be made of polyethylene terephthalate (PET) without any other added substances. However, exceptions will be made for bottles containing other materials if they are proven to be safe, hygienic, and recyclable.
Must not be coloured.
Handles must be made of uncoloured PET or polyethylene/polypropylene with a specific gravity of less than 1.0.
No printing on the bottle, except for small markings such as expiration dates, unique manufacturing symbols, or lot numbers.
Label
Must not contain polyvinyl chloride (PVC).
Must be separable from the bottle during recycling processes such as wind selection or washing.
Printing ink used on labels must not adhere to the bottle.
Must not use aluminium-laminated labels.
Cap
Must not use aluminium or PVC.
Must be made primarily of polyethylene or polypropylene with a specific gravity of less than 1.0.
If glass beads or gaskets are used, the label must include instructions for their removal.
2. Weight Requirements
The weight of each container (excluding labels and caps) must not exceed the values determined by the conditions are given in table below:
Type of Container |
Volume |
Weight per bottle |
1. Pre-sterilized containers used for aseptic filling at normal temperature |
|
(Bottle volume in ml× 0.0139)+14.2 grams |
2. Heat-resistant containers |
≤ 500 ml |
(Bottle volume×0.0164)+16.8 grams |
500-1500 ml |
(Bottle volume×0.0235)+13.3 grams |
|
> 1500 ml |
(Bottle volume×0.0098)+33.9 grams |
|
3. Pressure-resistant containers |
|
(Bottle volume×0.0136)+17.2 grams |
4. Heat and pressure resistant containers |
|
(Bottle volume×0.0178)+17.7 grams |
3. Recycling and Sustainable Material Requirements
At least 15% of the total weight of each container must consist of one of the following materials:
Recycled plastic, as specified by the Japanese Industrial Standards (JIS) Q 14021-7.8.1.1, or
Biomass plastic (organic material derived from plants or animals, excluding fossil resources).
These standards are established to promote environmentally sustainable practises and efficient recycling in the production of PET bottle containers for soft drinks.
Comment Period and Enforcement Dates
Stakeholders are invited to submit comments on this draft standard by 16 April 2025. The ministries have not yet confirmed the adoption date of the standard, but it will take effect on the date of final publication.